Objectives List🔗

Action: `action`🔗

This objective completes when the player clicks on the given block type. The first argument is the type of the click, it can be right, left or any. Next is a Block Selector or any if you want to count all clicks, even into the air. You can also specify the loc: argument, followed by the standard location format and the range: followed by a number (or variable). The specified location is the center of a sphere, the range it's radius. Therefore, these arguments define where the clicked block needs to be, as opposed to "where you must be" in location condition. If you add the argument cancel, the click will be canceled (chest will not open, button will not be pressed etc.). This objective works great with the location condition and the item in hand condition to further limit the counted clicks. One could make a magic wand using this.

The objective contains one property, location. It's a string formatted like X: 100, Y: 200, Z:300. It does not show the radius.

Example

action right DOOR conditions:holding_key loc:100;200;300;world range:5
action any any conditions:holding_magicWand events:fireSpell #Custom click listener for a wand

Arrow Shooting: `arrow`🔗

To complete this objective the player needs to shoot the arrow into the target. There are two arguments, location of the target and precision number (radius around location where the arrow must land, should be small). Note that the position of an arrow after hit is on the wall of a full block, which means that shooting not full blocks (like heads) won't give accurate results. Experiment with this objective a bit to make sure you've set the numbers correctly.

Example

arrow 100.5;200.5;300.5;world 1.1 events:reward conditions:correct_player_position

Break or Place Blocks: `block`🔗

To complete this objective the player must break or place the specified amount of blocks.

Parameter	Syntax	Default Value	Explanation
Block Type	Block Selector		The block which must be broken / placed.
Amount	Number		The amount of blocks to break / place. Less than 0 for breaking and more than 0 for placing blocks.
Safety Check	Keyword (`noSafety`)	Safety Check Enabled	The Safety Check prevents faking the objective. The progress will be reduced when the player does to opposite of what they are supposed to do. Example: Player must break 10 blocks. They place 10 of their stored blocks. Now the total amount of blocks to break is 20.
Notifications	Keyword (`notify`)	Disabled	Displays messages to the player each time they progress the objective. Optionally with the notification interval after colon.
Location	loc:location	Optional. Default: none	Adds an optional location to the objective, only counting blocks broken/placed at the specific location.
Region definer	region:location	Optional. Default: none	Adds an optional second location to only count blocks broken/placed in a rectangle between the specified location and this location. This won't have an effect if parameter location isn't set.
ignorecancel	Keyword (`ignorecancel`)	Protected blocks will not affect the objective	Allows the objective to progress, even if the event is cancelled by the Server. For example if the player is not allowed to build.

objectives:
  breakLogs: "block LOG -16 events:reward notify"
  placeBricks: "block BRICKS 64 events:epicReward notify:5"
  breakIron: "block IRON_ORE -16 noSafety notify events:dailyReward"

Variable Properties

Note that these follow the same rules as the amount argument, meaning that blocks to break are a negative number!

Name	Example Output	Explanation
amount	-6 / 6	Shows the amount of blocks already broken / placed.
left	-4 / 4	Shows the amount of blocks that still need to be broken / placed for the objective to be completed.
total	-10 / 10	Shows the initial amount of blocks that needed to be broken / placed.

You can use these variables to always get positive values:

Name	Example Output	Explanation
absoluteAmount	6	Shows the absolute amount of blocks already broken / placed.
absoluteLeft	4	Shows the absolute amount of blocks that still need to be broken / placed for the objective to be completed.
absoluteTotal	10	Shows the initial absolute amount of blocks that needed to be broken / placed.

Breed animals: `breed`🔗

This objective is completed by breeding animals of specified type. The first argument is the animal type and the second argument is the amount (positive integer). You can add the notify argument to display a message with the remaining amount each time the animal is bred, optionally with the notification interval after a colon. While you can specify any entity, the objective will be completable only for breedable ones.

This objective has three properties: amount, left and total. amount is the amount of animals already breed, left is the amount of animals still needed to breed and total is the amount of animals initially required.

Example

breed cow 10 notify:2 events:reward

Put items in a chest: `chestput`🔗

This objective requires the player to put specified items in a specified chest. First argument is a location of the chest, second argument is a list of items (from items section), separated with a comma. You can also add amount of items after a colon. The items will be removed upon completing the objective unless you add items-stay optional argument. By default, only one player can look into the chest at the same time. You can change it by adding the key multipleaccess.

Example

chestput 100;200;300;world emerald:5,sword events:tag,message
chestput 0;50;100;world apple:42 events:message multipleaccess:true

Eat/drink: `consume`🔗

This objective is completed by eating the specified food or drinking the specified potion.

Parameter	Syntax	Default Value	Explanation
Item	Quest Item		The item or potion that must be consumed.
Amount	amount:number	1	The amount of items to consume.

objectives:
  eatApple: "consume apple events:faster_endurance_regen"
  eatSteak: "consume steak amount:4 events:health_boost"

Variable Properties

Name	Example Output	Explanation
amount	6	Shows the amount of items already consumed.
left	4	Shows the amount of items that still need to be consumed for the objective to be completed.
total	10	Shows the initial amount of items that needed to be consumed.

Crafting: `craft`🔗

To complete this objective the player must craft specified item. First argument is ID of the item, as in the items section. Next is amount (integer). You can use the notify keyword to display a message each time the player advances the objective, optionally with the notification interval after a colon.

This objective has three properties: amount, left and total. amount is the amount of items already crafted, left is the amount of items still needed to craft and total is the amount of items initially required.

Example

craft saddle 5 events:reward

Enchant item: `enchant`🔗

This objective is completed when the player enchants the specified quest item with the specified enchantment.

Parameter	Syntax	Default Value	Explanation
item	Quest Item		The quest item that must be enchanted.
enchants	enchantment:level		The enchants that must be added to the item. Enchantment names are different from the vanilla ones. If a level is present, the enchanted level must be equal or bigger then the specified one. Multiple enchants are supported: `ARROW_DAMAGE:1,ARROW_FIRE:1`
requirementMode	requirementMode:mode	`all`	Use `one` if any enchantment from `enchants` should complete the objective. Use `all` if all are required at the same time.
amount	amount:number	1	The amount of items to enchant.

Example

lordSword: "enchant lordsSword damage_all,knockback events:rewardLord"
kingSword: "enchant kingsSword damage_all:2,knockback:1 events:rewardKing"
massProduction: "enchant ironSword sharpness amount:10 events:blacksmithLevel2Reward"

Variable Properties

Name	Example Output	Explanation
amount	6	Shows the amount of items already enchanted.
left	4	Shows the amount of items that still need to be enchanted for the objective to be completed.
total	10	Shows the initial amount of items that needed to be enchanted.

Experience: `experience`🔗

This objective can be completed by reaching the specified amount of experience levels. You can also define decimal numbers, for example experience 1.5 will complete when the player reaches 1.5 experience levels or more. If you want to check for an absolute amount of experience points you can convert it to decimal levels. The objective is checked every time the player gets experience naturally, such as killing mobs or mining blocks. Additionally, it is checked if the player reaches a new level in any way (vanilla level up, commands or other plugins). The objective will also imminently complete if the player already has the experience level or more. And it will also be completed if the player joins the game with the specified amount of experience levels or more. You can use the notify keyword to display a message each time the player advances the objective, optionally with the notification interval after a colon.

This objective has three properties: amount, left and total. amount is the current amount of experience levels, left is the amount of experience levels still needed and total is the amount of experience required.

Example

experience 25 level events:reward

Wait: `delay`🔗

This objective completes itself after certain amount of time. The player must be online and meet all conditions. If the player is not online the objective is completed on the player's next login.

Parameter	Syntax	Default Value	Explanation
time	Any Number		The time after which the objective is completed.
unit	Keyword	minutes	The unit of time. Either `minutes`, `seconds` or `ticks`.
precision	interval:number	interval:200	The interval in which the objective checks if the time is up. Measured in ticks. Low values cost more performance but make the objective preciser.

Example

objectives:
  waitDay: "delay 1440 events:resetDaily" #(1)!
  wait50sec: "delay 1000 ticks interval:5 events:failQuest" #(2)!

Runs the resetDaily event after 1440 minutes (24 hours).
Runs the failQuest event after 1000 ticks (50 seconds) have passed. The objective checks every 5 ticks (250ms) if the time is up.

Variable Properties

Name	Example Output	Explanation
left	23 days 5 hours 45 minutes 17 seconds	Shows the time left until the objective is completed.
date	17.04.2022 16:14	Shows the date the objective is completed at using the config's `date_format` setting.
rawSeconds	5482	Shows the amount of seconds until objective completion.

Death: `die`🔗

Death objective completes when the player dies meeting all conditions. You can optionally cancel death with cancel argument. It will heal player and optionally teleport him to respawn location. There can be two arguments: cancel, which is optional, and respawn:, which is also optional and only used if there is the cancel argument set. You can add them right after type of objective.

Example

die cancel respawn:100;200;300;world;90;0 events:teleport

Fishing: `fish`🔗

Requires the player to catch something with the fishing rod. It doesn't have to be a fish, it can also be any other item.

Parameter	Syntax	Default Value	Explanation
item	Block Selector		The item that must be caught.
amount	Any Number		The amount that must be caught.
notifications	notify:number	notify:0	Add `notify` to display a notification when a fish is caught. Optionally with the notification interval after a colon.
hookLocation	hookLocation:Location	Everywhere	The location at which the item must be caught. Range must also be defined.
range	range:number	Everywhere	The range around the `hookLocation`.

Example

objectives:
  fisherman: "fish SALMON 5 notify events:tag_fish_caught" #(1)!
  fishAtPond: "fish COD 5 hookLocation:123;456;789;fishWorld range:10 events:giveSpecialFish" #(2)!

Requires the player to catch 5 salmon. The player will get a notification for every caught fish.
Requires the player to catch 5 cod. The rod's hook must be used in a 10 block radius around x:123 y:456 z:789 in a world named fishWorld.

Variable Properties

Name	Example Output	Explanation
left	4	The amount of fish still left to be caught.
amount	6	The amount of already caught fish.
total	10	The initially required amount of fish needed to be caught.

Interact with entity: `interact`🔗

The player must click on an entity to complete this objective. The first argument is the type of a click. Available values are right, left and any. Second required argument is the mob type. Next is an amount of mobs required to click on. These must be unique, so the player can't simply click twenty times on the same zombie to complete it. There is also an optional name: parameter which specifies what custom name the entity must have (you need to write _ instead of the space character). To check for the real name (e.g. if you renamed players to include their rank) you can also use realname: instead. Add marked: if the clicked entity needs to be marked by the spawn event (see its description for marking explanation). You can also add notify argument to make the objective notify players whenever they click a correct entity, optionally with the notification interval after colon and cancel if the click shouldn't do what it usually does (i.e. left click won't hurt the entity). This can be limited with an optional loc and range attribute to limit within a range of a location.

This objective has three properties: amount, left and total. amount is the amount of entities already interacted with, left is the amount of entities still needed to be interacted with and total is the amount of entities initially required.

Example

interact right creeper 1 marked:sick condition:syringeInHand cancel

Resource pack state: `resourcepack`🔗

To complete this objective the player must have the specified resource pack state. The first argument is the state of the resource pack. It can be successfully_loaded, declined, failed_download and accepted.

Example

resourcepack successfully_loaded events:reward
resourcepack declined events:declined

Kill player: `kill`🔗

To complete this objective the player needs to kill another player. The first argument is amount of players to kill. You can also specify additional arguments: name: followed by the name will only accept killing players with this name, required: followed by a list of conditions separated with commas will only accept killing players meeting these conditions and notify will display notifications when a player is killed, optionally with the notification interval after a colon.

The kill objective has three properties: left is the amount of players still left to kill, amount is the amount of already killed players and total is the initially required amount to kill.

Example

kill 5 required:team_B

Location: `location`🔗

The specified location where the player needs to be. It is not required to specify entry or exit then the objective also completes if the player just moves inside the location's range.

Parameter	Syntax	Default Value	Explanation
location	ULF		The location to go to
range	range:number		The range arround the location where the player must be.
entry	entry:keyword	Disabled	The player must enter (go from outside to inside) the location to complete the objective.
exit	exit:keyword	Disabled	The player must exit (go from inside to outside) the location to complete the objective.

Example

location 100;200;300;world 5 condition:started events:notifyWelcome,start
location 100;200;300;world 5 exit conditions:started events:notifyBye

Variable Properties

Name	Example Output	Explanation
location	X: 100, Y: 200, Z:300	The target location of this objective

Login: `login`🔗

To complete this objective the player simply needs to login to the server. If you use global this objective will be also completed directly when a new player joins for the first time. If you use persistent it will be permanent. Don't forget that if you use global and persistent you can still remove the objective explicitly.

Example

login events:welcome_message

Logout: `logout`🔗

To complete this objective the player simply needs to leave the server. Keep in mind that running a folder event here will make it run in "persistent" mode, since the player is offline on the next tick.

Example

logout events:delete_objective

Password: `password`🔗

This objective requires the player to write a certain password in chat. All attempts of a player will be hidden from public chat. The password consists of a prefix followed by the actual secret word:

Solution: The Cake is a lie!     
^prefix   ^secret word(s)

The objective's instruction string is defined as follows:

The first argument is the password, use underscore characters (_) instead of spaces. The password is a regular expression.
The prefix can be changed: The default (when no prefix is set) is the translated prefix from the messages.yml config in the user's language.
Note that every custom prefix is suffixed with :⠀, so prefix:Library_password will require the user to enter Library password: myfancypassword.
To disable the prefix use an empty prefix: declaration, e.g. password myfancypassword prefix: events:success. Be aware of these side effects that come with disabling the prefix:
- Nothing will be hidden on failure, so tries will be visible in chat and commands will get executed!
- If a command was used to enter the password, the command will not be canceled on success and thus still be executed!
- This ensures that even if your password is quest you can still execute the /quest command.
You can also add the ignoreCase argument if you want a password's capitalization to be ignored. This is especially important for regex matching.
If you want to trigger one or more events when the player failed to guess the password you can use the argument fail with a list of events (comma separated). With disabled prefix every command or chat message will trigger these events!

objectives:
  theBetonPassword: "password beton ignoreCase prefix:secret fail:failEvent1,failEvent2 events:message,reward"

Pickup item: `pickup`🔗

To complete this objective you need to pickup the specified amount of items. The first argument must be the internal name of an item defined in the items section. This can also be a comma-separated list of multiple items. You can optionally add the amount: argument to specify how many of these items the player needs to pickup. This amount is a total amount though, it does not count per each individual item. You can use the notify keyword to display a message each time the player advances the objective, optionally with the notification interval after a colon.

You can also add the notify keyword to display how many items are left to pickup.

This objective has three properties: amount, left and total. amount is the amount of items already picked up, left is the amount of items still needed to pick up and total is the amount of items initially required.

Example

pickup emerald amount:3 events:reward notify
pickup emerald,diamond amount:6 events:reward notify

Entity Kill: `mobkill`🔗

The player must kill the specified amount of entities (living creatures). All entities work, make sure to use their correct types.

Parameter	Syntax	Default Value	Explanation
type	ENTITY_TYPE,ENTITY_TYPE		A list of entities, e.g. `ZOMBIE,SKELETON`.
amount	Positive Number		Amount of mobs to kill in total.
name	name:text	Disabled	Only count named mobs. Spaces must be replaced with `_`.
marked	marked:keyword	Disabled	Only count marked mobs. See the spawn event for more information. Supports variables.
notify	notify:interval	Disabled	Display a message to the player each time they kill a mob. Optionally with the notification interval after colon.

Example

objectives:
  monsterHunter: "mobkill ZOMBIE,SKELETON,SPIDER 10 notify" #(1)!
  specialMob: "mobkill PIG 1 marked:special" #(2)!
  bossZombie: "mobkill ZOMBIE 1 name:Uber_Zombie" #(3)!

The player must kill a zombie,skeleton or a spider to progress this objective. In total, they must kill 10 entities. Additionally, there will be a notification after each kill.
The player must kill a pig that was spawned with the spawn event and has a marker.
The player must kill a zombie named "Uber Zombie".

Variable Properties

Name	Example Output	Explanation
amount	2	Shows the amount of mobs already killed.
left	8	Shows the amount of mobs that still need to be killed.
total	10	Shows the amount of mobs initially required to kill.

Potion brewing: `brew`🔗

To complete this objective the player needs to brew specified amount of specified potions. The first argument is a potion ID from the items section. Second argument is amount of potions. You can optionally add notify argument to make the objective display progress to players, optionally with the notification interval after a colon.

Progress will be counted for the player who last added or changed an item before the brew process completed. Only newly created potions are counted.

This objective has three properties: amount, left and total. amount is the amount of potions already brewed, left is the amount of potions still needed to brew and total is the amount of potions initially required.

Example

brew weird_concoction 4 event:add_tag

Sheep shearing: `shear`🔗

To complete this objective the player has to shear specified amount of sheep, optionally with specified color and/or name. The first, required argument is amount (integer). Optionally, you can add a name: argument to only count specific sheep. All underscores will be replaced by spaces - if you want to use underscores, put a \ before them. You can also check for the sheep's color: using these color names. You can use the notify keyword to display a message each time the player advances the objective, optionally with the notification interval after a colon.

This objective has three properties: amount, left and total. amount is the amount of sheep already sheared, left is the amount of sheep still needed to shear and total is the amount of sheep initially required.

Example

shear 1 name:Bob color:black
shear 1 name:jeb\_
"shear 1 name:jeb\\_" #Use two backslashes if quoted

Smelting: `smelt`🔗

To complete this objective the player must smelt the specified item. Note that you must define the output item, not the ingredient. The first argument is the name of a Quest Item. The second one is the amount (integer).

You can use the notify keyword to display a message each time the player advances the objective, optionally with the notification interval after a colon.

This objective has three properties: amount, left and total. amount is the amount of items already smelted, left is the amount of items still needed to smelt and total is the amount of items initially required.

Example

smeltIron: "smelt ironIngot 5 events:reward"

Stages: `stage`🔗

The Stage objective is a special objective that can be used to track the progress of a quest or a part of a quest. It can be completed in two ways, the first one is by increasing the stage more than there are stages defined and the second one is by completing the objective with the objective event. The behaviour of completing the objective by increasing the stage can be disabled by setting the preventCompletion flag.

When the conditions of the stage objective are not met, the stage of the player can not be modified.
You can modify the stages with the stage event and check it's state with the stage condition.

Parameter	Syntax	Default Value	Explanation
stages	List of stage names		The stages that must be completed.
preventCompletion	Keyword	Completion Enabled	Prevents the objective from being completed by increasing the stage.

Example

objectives:
  questProgress: "stage part1,part2,part3"
  bakeCookies: "stage collectIngredients,cookCookies,deliverCookies preventCompletion"

Variable Properties

Name	Example Output	Explanation
index	2	The index of the players current stage beginning at 1.
current	cookCookies	The current stage name of the player or empty if the objective is not active.
next	deliverCookies	The next stage name of the player or empty if the objective is not active.
previous	collectIngredients	The previous stage name of the player or empty if the objective is not active.

Step on pressure plate: `step`🔗

To complete this objective the player has to step on a pressure plate at a given location. The type of plate does not matter. The first and only required argument is a location. If the pressure plate is not present at that location, the objective will not be completable and will log errors in the console.

Step objective contains one property, location. It shows the exact location of the pressure plate in a string formatted like X: 100, Y: 200, Z:300.

Example

step 100;200;300;world events:done

Taming: `tame`🔗

To complete this objective player must tame some amount of mobs. First argument is type, second is amount. The mob must be tamable for the objective to be valid, e.g.: CAT, DONKEY, HORSE, LLAMA, PARROT or WOLF. You can use the notify keyword to display a message each time the player advances the objective, optionally with the notification interval after a colon.

This objective has three properties: amount, left and total. amount is the amount of animals already tamed, left is the amount of animals still needed to tame and total is the amount of animals initially required.

Example

tame WOLF 2 events:wolfs_tamed

Player must Jump: `jump`🔗

Objective · Requires Paper

To complete this objective the player must jump. The only argument is amount. You can use the notify keyword to display a message each time the player advances the objective, optionally with the notification interval after a colon.

This objective has three properties: amount, left and total. amount is the amount of jumps already done, left is the amount of jumps still needed and total is the amount of jumps initially required.

Example

jump 15 events:legExerciseDone

Ride an entity: `ride`🔗

This objective can be completed by riding the specified entity. any is also a valid input and matches any entity.

Example

ride horse
ride any

Run a Command: `command`🔗

To complete this objective the player must execute a specified command. It can be both an existing or a new, custom command. The first argument is the command text. Use _ in place of spaces for the command. If you need an actual _ in your command, you must escape it using a backslash (\, see example below). The command argument is case-sensitive and also supports using placeholders. The second required argument is a list of events to execute when the objective is met.

Example

command /warp_%player%_farms events:event1,event2
command //replace_oak\_wood events:event1,event2

With this configuration, the command objective requires the player to execute /warp MyName farms to be completed. The command objective matches from the start of the command that was executed, therefore if the player executed /warp MyName farms other arguments it would still be completed.

Optional arguments:

ignoreCase: If provided, instructs the objective to ignore case for the command to match.
exact: If provided, requires an exact command match, not just the command start.
cancel: If provided, the objective will cancel the execution of the command on a match. This needs to be enabled to suppress the Unknown Command message when using custom commands.
failEvents: If provided, specifies a list of events to execute if a non-matching command is run and conditions are met.

Complex

command /warp_%player%_farms ignoreCase exact cancel failEvents:failEvent1,failEvent2 events:event1,event2

Warning

Sometimes you want to use actual underscores in your command. These will however be replaced with spaces by default. You can "escape" them using backslashes: One backslash (\) is required when using no quoting at all (...) or single quotes ('...'). Two backslashes are required (\\) when using double quotes ("...").

Examples:
eventName: command /enchant_@s_minecraft:aqua_affinity eventName:command /enchant_@s_minecraft:aqua\_affinity
eventName: 'command /enchant_@s_minecraft:aqua_affinity' eventName: 'command /enchant_@s_minecraft:aqua\_affinity'
eventName: "command /enchant_@s_minecraft:aqua_affinity" eventName: "command /enchant_@s_minecraft:aqua\\_affinity"

Equip Armor Item: `equip`🔗

Objective · Requires Paper

The player must equip the specified quest item in the specified slot. The item must be any quest item as defined in the items section. Available slot types: HEAD, CHEST, LEGS, FEET.

equip HEAD amazing_helmet events:event1,event2
equip CHEST amazing_armor events:event1,event2

Variable: `variable`🔗

This objective is different. You cannot complete it, it will also ignore defined events and conditions. You can start it and that's it. While this objective is active though, everything the player types in chat (and matches a special pattern) will become a variable. The pattern is key: value. So if the player types MyFirstVariable: Hello!, it will create a variable called MyFirstVariable, which will resolve as a Hello! string. These are not global variables, you can access them as objective properties. Let's say you defined this objective as CustomVariable in your objectives.yml file. You can access the variable in any conversation, event or condition with %objective.CustomVariable.MyFirstVariable% - and in the case of this example, it will resolve to Hello!. The player can type something else and the variable will change its value. Variables are per-player, so the value of one player's MyFirstVariable will be different from other players' MyFirstVariable values, depending on what they typed in chat. There is no limit to the amount of variables that can be created and assigned to players. To remove this objective, use objective delete event - there is no other way.

You can also use variable event to change variables stored in this objective. There is one optional argument, no-chat. If you use it, the objective won't be modified by what players type in chat which is only useful when you're also using the variable event.

Example

variable

Objectives List🔗

Action: action🔗

Arrow Shooting: arrow🔗

Break or Place Blocks: block🔗

Variable Properties

Breed animals: breed🔗

Put items in a chest: chestput🔗

Eat/drink: consume🔗

Variable Properties

Crafting: craft🔗

Enchant item: enchant🔗

Variable Properties

Experience: experience🔗

Wait: delay🔗

Variable Properties

Death: die🔗

Fishing: fish🔗

Variable Properties

Interact with entity: interact🔗

Resource pack state: resourcepack🔗

Kill player: kill🔗

Location: location🔗

Variable Properties

Login: login🔗

Logout: logout🔗

Password: password🔗

Pickup item: pickup🔗

Entity Kill: mobkill🔗

Variable Properties

Potion brewing: brew🔗

Sheep shearing: shear🔗

Smelting: smelt🔗

Stages: stage🔗

Variable Properties

Step on pressure plate: step🔗

Taming: tame🔗

Player must Jump: jump🔗

Ride an entity: ride🔗

Run a Command: command🔗

Equip Armor Item: equip🔗

Variable: variable🔗

Action: `action`🔗

Arrow Shooting: `arrow`🔗

Break or Place Blocks: `block`🔗

Breed animals: `breed`🔗

Put items in a chest: `chestput`🔗

Eat/drink: `consume`🔗

Crafting: `craft`🔗

Enchant item: `enchant`🔗

Experience: `experience`🔗

Wait: `delay`🔗

Death: `die`🔗

Fishing: `fish`🔗

Interact with entity: `interact`🔗

Resource pack state: `resourcepack`🔗

Kill player: `kill`🔗

Location: `location`🔗

Login: `login`🔗

Logout: `logout`🔗

Password: `password`🔗

Pickup item: `pickup`🔗

Entity Kill: `mobkill`🔗

Potion brewing: `brew`🔗

Sheep shearing: `shear`🔗

Smelting: `smelt`🔗

Stages: `stage`🔗

Step on pressure plate: `step`🔗

Taming: `tame`🔗

Player must Jump: `jump`🔗

Ride an entity: `ride`🔗

Run a Command: `command`🔗

Equip Armor Item: `equip`🔗

Variable: `variable`🔗